Spring & Wire Form Finishing Services

Stress Relieve
A low temperature heat treatment given to springs and wire forms to relieve residual stresses produced by prior cold forming.  This improves the spring’s or wire form’s shape memory to spring back to its formed shape and resist taking a set.

Heat Treat
For special heat treating at temperatures above stress relieving, such as anneal, austemper, harden and temper, vacuum heat treat, and ferritic nitrocarburize, we use qualified heat treat companies that are located within 15 minutes drive for quick service.

Shot Peen
This service blasts the surface of spring material with steel or glass pellets to induce compressive stresses that improve fatigue life.

Tumble
This service shines the parts and removes sharp edges.

Plate
The most common plating requests we receive are listed below.   If you don’t see your plating requirement, just ask for it and we will get it done.

• Anodize (clear and various colors)
• Black Oxide
• Cadmium Plate (clear, yellow, blue, red, black, olive drab)
• Chrome
• Chromate (Clear, black, yellow, olive drab)
• Copper
• Electroless Nickel
• Electrolytic Nickel Plate (bright, dull)
• Tin Plate (bright, dull)
• Zinc electroplating (clear, black, yellow, green, red, and blue)

Powder Coat
Numerous colors.

Passivate
Acid treatment of stainless steel to remove contaminants and improve corrosion resistance.   Recommended for medical and food industries.

Electropolish
Has best results on 300 series stainless steels.  Brightens, removes burrs, and passivates.

Dye or Paint
We use ITW Dykem or Dell Marking Systems dye to color code your parts in any color at your request.

Bake Enamel
Assorted colors.

Plastic Coat
We can plastic coat your parts in various colors.

Contact us for more information on our finishing services.