Products

Get unique, complex parts easily. No matter your requirements, Master Spring creates hard-to-produce coil springs and wire forms.

Custom Wire Forms

Let us help you create the custom wire form you need, from S-hooks and J-hooks to utility hooks and more.

Industries

We work closely with customers across a wide range of industries, helping them design and manufacture made-to-order parts.

Master Spring Advantage

Why choose Master Spring? We prioritize customer-focused collaboration, modern equipment and the latest technology to make your parts per print.

Leading Supplier of Wire Forms and Springs for the Construction Power Tool Industry

With over 75 years of manufacturing experience, Master Spring is a proven U.S. supplier of wire forms and coil springs for the construction power tool industry.

Made-to-Order Wire Forms and Coil Springs for Construction Power Tools Equipment

We manufacture wire forms and springs for construction power tools, cordless and pneumatic finish and brad nailers, framing and roofing nailers, staplers, hammer tools and plumbing in-pipe camera equipment.

Belt or rafter hook for hanging construction power tool

Utility Hook

Part Names: Reversible belt hook, belt clip, adjustable rafter hook, suspension hook, hang hook, utility hook wire form

Industry: Construction power tools

Application: Belt or rafter hook for hanging construction power tool

Material: 0.250” annealed C1065 cold-rolled steel

Special Features: Reduce wire diameter, chamfer, thread, swage (press), austemper harden, electroless nickel plate, nylon thread lock

Workpiece contact probe

Workpiece Contact Probe

Part Names: Contact trip, precision point tip, contact tip, work contact element, nose piece, no-mar tip, workpiece contact probe

Industry: Construction power tools

Application: Workpiece contact probe presses against work surface to aim nail and allow nailing gun to fire

Material: 0.156” annealed C1065 cold-rolled steel

Special Features: Reduce wire diameter, chamfer both ends, thread, notch (press), austemper harden, black oxide finish

Tosion spring for nailing gun trigger

Trigger Spring

Part Names: Torsion spring, trigger spring

Industry: Construction power tools

Application: Torsion spring for nailing gun trigger

Material: 0.032” pre-plated galvanized music wire

Special Features: Special packed 500 pieces per bag

Yoke Spring Guide Assembly

Yoke Spring Guide Assembly

Part Names: Yoke spring, CENG compression spring

Industry: Construction power tools

Application: Compression spring for yoke in combustion chamber of nailing gun

Material: 0.020” pre-plated galvanized music wire

Special Features: Closed ends and not ground, plastic spring guide is assembled to end of spring, packed 500 pieces per bag

Chamber Return Springs

Chamber Return Spring

Part Names: Return spring, chamber return spring, CEG compression spring

Industry: Construction power tools

Application: Compression spring returns chamber to starting position after nailing gun

Material: 0.030” phos music wire

Special Features: Closed ends and ground, electroless nickel plate, packed 500 pieces per bag

Magazine Latch Dual Torsion Spring

Magazine Latch Dual Torsion Spring

Part Names: Magazine lock spring, magazine latch spring

Industry: Construction power tools

Application: Double torsion spring for magazine latch release on nailing gun

Material: 0.058” hard drawn bright wire

Special Features: Special packed 250 pieces per small box

In-pipe diagnostic camera spring

Camera Spring

Part Names: Coil spring, plumbing camera spring

Industry: Plumbing tools

Application: In-pipe diagnostic camera equipment for plumbing applications

Material: 0.095” 17-7 PH stainless steel wire

Special Features: Spring end is chamfered; electropolished to a bright finish

Close wound coil springs

Hourglass Spring

Part Names: Close wound coil spring, hourglass spring

Industry: Plumbing tools

Application: In-pipe diagnostic camera equipment for plumbing applications

Material: 0.138″ 17-7 stainless steel condition C wire

Special Features: Coils wound tightly together

Lockout Bar Spring

Lockout Bar Spring

Part Names: Small compression spring, CEG compression spring, lockout bar spring

Industry: Construction power tools

Application: Prevents unwanted nailing gun cycling when nail magazine is empty

Material: 0.010” stainless steel 302 wire

Special Features: Closed ends and ground; packed 500 parts per bag

CENG stainless steel compression springs

Metering Valve Spring

Part Names: CENG stainless steel compression spring, metering valve spring, fuel cartridge spring

Industry: Construction power tools

Application: Pressurized gas cartridge or canister

Material: 0.024” stainless steel 302 wire

Special Features: Closed ends and not ground

fastener trigger spring

Fastener Trigger Spring

Part Names: Torsion spring, trigger spring

Industry: Construction power tools

Application: Torsion spring is used in the trigger assembly of a nailing tool

Material: 0.040” Type 302 stainless steel wire

Special Features: Bagged in quantities of 250 pieces to make assembly easy

Load More

decorative image

Customer Success Story

As the leading supplier of cordless and pneumatic nailers, staplers and fasteners, our customer needed a belt hook wire form for construction workers to hang power tools on a work belt or wooden rafter. The customer’s previous wire form manufacturer could only produce what they needed by using multiple, isolated steps, which resulted in a more expensive wire form that didn’t always work. By automating multiple operations into a continuous production cell, we decreased production costs and increased quality, making better wire form belt hooks at a faster rate.



Together We Achieved

  • Multiple operations automated into one flexible production cell
  • Increased quality
  • Faster production rate

Customer Wire Form Challenge

The wire form appears simple at first glance, but requires many operations to manufacture. One end of the wire is machined to a smaller diameter so that the final diameter after thread rolling is the same as the original wire diameter. The sharp ends are then broken or chamfered. The middle of the wire is swaged to form teeth that can grip into a wooden rafter. There are multiple bends, including an offset bend to both sides of a loop, as well as a bend in the end that butts against the other side. The bending is a complicated operation, but our top-notch CNC wire-bending machinery and engineers can handle it.


Master Spring Solution

In order to compete against this customer’s overseas component suppliers, we removed as much labor from the production process as possible. We automated multiple operations to create a flexible production cell that includes a CNC wire former, a turndown, chamfer, thread and mill machine, a press and a robot. The production cell starts with a coil of wire and ends with a formed belt hook that includes the threads and swaged wings. Three proven, local vendors provide the required special heat treating, electroless nickel plating and nylon patch application to the thread.


Results

With Master Spring’s wire forming knowledge, automated production process and strong customer support, our OEM customer receives better quality wire forms and springs, shorter lead times and competitive pricing. We offer a better value than any overseas supplier.


Read More
decorative image

Customer Success Story

Our customer, a finish, framing and brad nail gun manufacturer, used a double torsion spring in the fastener magazine latch-release of their nailing gun. They discovered that the torsional leg of their spring design was dislodging from the latch-release button. The construction power tool manufacturer asked Master Spring to quickly find a solution.



Together We Achieved

  • A redesigned double torsion spring
  • No increased costs
  • No changes to the mating part

Customer Torsion Spring Challenge

The customer needed a double torsion spring that not only worked but would stay fastened to the magazine latch-release assembly. The magazine latch release spring’s legs each had one 90-degree bend and butted against each other through the center hole of its plastic-button mating part. One leg of the latch-release spring would occasionally dislodge from the assembly if the other leg end pushed it out. The customer needed a magazine latch-release double torsion spring that stayed in place once installed. They did not want to make a change to the plastic-molded mating part.


Master Spring Solution

Upon seeing how the torsion spring’s leg ends easily moved back and forth out of the hole of the magazine latch-release button, our engineer and skilled machine technician realized the problem. The legs were too far from the button’s center hole. They determined where bends were needed in each leg to bring the torsion spring legs closer to the button’s center hole. Our skilled machine technician quickly programmed the design changes and sent samples to our customer the next day.


Results

This double torsion spring is a great example of Master Spring’s design expertise. By putting extra bends in each leg, we designed and manufactured a double torsion spring that fit closer to the assembly so the magazine latch-release spring would stay secure to the button.


Read More

Master Spring Advantage

Customers select Master Spring to produce parts that are difficult to form, finish or package. We do what other manufacturers can’t.

Learn More
divider Bar

Contact Master Spring

Need a custom wire form or coil spring? We make it work. Fill out the contact form and a representative will respond within 1 business day. If you have a PDF or CAD file, you can submit to request a quote.

i

Request a Quote

Product

i
i

Your Team For Innovative Wire Forming

We provide solutions for complex, high-quality
wire forms and coil springs.

78 Congress Circle West, Roselle, IL 60172

P: 708.453.2570 | Contact Us

We do not stock standard springs,
we make made-to-order custom springs.